German Version
English Version
 Your are here: TRENN-QUICK BE

Product information

TRENN-QUICK BE is a special anti-caking agent for the concrete industry that is easily biologically degradable (it has been approved and awarded the label "Blauer Umweltengel" by Deutsches Institut für Gütesicherung und Kennzeichnung e.V.) It is perfectly suited for site-mixed concrete and it protects construction machinery and vehicles from concrete caking.

Product identification:
TRENN-QUICK BE contains special basic oils and active agents for the various product requirements. There were selected with focus on easy application and practical suitability. TRENN-QUICK BE forms a pressure-resistant and firm separating film and thus demonstrably prevents caking even at inaccessible spots. It ensures easy and quick release of formwork and is gentle on the material.

TRENN-QUICK BE is anti-corrosive and does not have an aggressive effect on lacquers, plastics or metals.

Typical data:
Appearance: Golden yellowish to brownish
Odour: Pleasantly mild
Density (15 °C): Approx. 860 kg / m³
Viscosity (40 °C) Approx. 8.0 mm² / sec
Flash point: > 100 °C
Pour point < - 25 °C

Usable for any typical formwork. Ideally, product should be applied by means of spraying at 4-6 bar with fan nozzle. Attention should be paid to even and sparing application. Puddles should be removed.

1 litre TRENN-QUICK BE is sufficient for approx. 60-70 m² depending on application style and type of formwork.
Residues of this lubricant/ concrete release agent should not seep into drainage or soil. Product should not be disposed of together with mineral lubricants/ concrete release agents because waste oil treatment would be adversely affected. It is recommended to turn residues over to local collecting points or dispose of them at waste incineration plants.

All products are subject to regular testing by our in-house lubricant laboratory responsible for product development and monitoring.

If you have further questions do not hesitate to contact us on +49 (0)4661 9685-0.

The information provided in this product specification represents the current state of knowledge and experience. Due to possible effects when processing and applying our products, the processor is not relieved of the duty to perform inspections and tests on his own account. No legally binding warranties for certain characteristics nor applicability for a specific use shall be derived from this information. Any applicable laws, regulations as well as property rights shall be observed by the processor.